INDUCTION LOOP – WIRELESS
£600.00 – £840.00
SUPPLY AND FIT WIRELESS INDUCTION LOOP
Wireless surface inductive loop in radar version
The wireless inductive loop system uses magnetometric sensors to detect the presence of a vehicle.
The loop, mounted in the ground, sends a wireless signal to the radio module placed in any device in the range
The loops are fastened with special concrete screws provided by the manufacturer, they contain four replaceable lithium batteries.
The durability of the housing allows the passage of virtually any vehicle.
The BPN-IR version is equipped with an additional real-time vehicle detection radar. Thanks to this solution, we gain greater security and functionality.
BPN-IR sensors can detect stopped vehicles within the radar detection range. Thanks to two-way radio communication, the devices ensure increased safety of the passage.
When the magnetometric sensor detects an approaching vehicle, the relay will be blocked and information about the presence of the vehicle will be sent to the receiver. If the magnetic field falls below a set threshold, the radar will check if the vehicle is within range. If no object is detected, the command to unlock the relay is sent to the receiver.
Radar settings can be adjusted using a dedicated e-Diagnostyk device. The following parameters can be adjusted: dead zone, sensor-receiver distance, sensitivity, magnetic field triggering threshold, relay unlock confirmation mode